How much pulling power do you need?

20 Ton30 Ton40 Ton

Hydraulic Pulling Unit using Cable

The general-duty TA-20 is designed to efficiently handle every-day jobs that require pulling standard 4″ pipe through soil that is not highly compacted.

The TA-20 comes standard with a 9 HP hydraulic power supply, and two chain carts containing 1/2″ pulling chain and 3/8″ retaining chain.

Specification Chart

TA-30 Unit using Cable

The heavy-duty TA-30 is your choice for tough jobs and is capable of pulling up to 6″ pipe through any soil conditions.

The TA-30 comes standard with a 9 HP hydraulic power supply, and two chain carts containing 100′ 5/8″ chain to pull high-density polyethylene pipe only.

 

The TA-40 pipe pulling unit easily handles a wide variety of general jobs and is capable of pulling 4″ to 6″ pipe in any soil conditions.

The TA-40 comes standard with a 9 HP hydraulic power supply and three chain carts containing 5/8″ chain.

Specification Chart

Detailed Specification Chart

COMPONENT 20 TON 30 TON 40 TON
Frame T-100 Steel – 1/4″ thick square tubing and 3/16″ thick square tubing
Working Pressure (oil) 3000 psi
Pulling Power 40,000 lbs 60,000 lbs 80,000 lbs
Cylinders (2 Cylinders each) sized 3″ sized 3.5″ sized 4″
Pulley (Working Load) 20 t 30 t 40 t
Chain Couplers (3) 2 3 3
Pulling & Retaining Latches 20 t 30 t 40 t
Chain (100 ft. Syst 10, Gr 100) 1/2″ 5/8″ 5/8″
Cable (100 ft. Swage) 3/4″ 3/4″ 7/8″
Relief Valve (Set at 3000 psi)
Power Supply 9 hp Honda 9 hp Honda 9 hp Honda
Maximum Pipe Bursting Size 4″ 6″ 4 – 8″
Breaking Cone Material 4140 tool steel (heat treated)
Length 20″ 20″ 20″
Height 22″ 25″ 25″
Width 16″ 16″ 16″
Weight 175 lbs 190 lbs 220 lbs
Work Space Required 24″ x 36″ 24″ x 36″ 24″ x 36″

 

Honda Power Pack 9 hp gas engine 2 Stage pump see manufacture’s specs Stage 1 Low Pressure 1100 psi – low volume 6 GPM Stage 2 High Pressure 3000 psi – low volume 1.8 GPM